Uses of Class
org.meteoinfo.jts.geom.Geometry

Packages that use Geometry

Package	Description
org.meteoinfo.chart
org.meteoinfo.jts.algorithm
org.meteoinfo.jts.algorithm.distance
org.meteoinfo.jts.algorithm.locate
org.meteoinfo.jts.algorithm.match
org.meteoinfo.jts.awt
org.meteoinfo.jts.densify
org.meteoinfo.jts.dissolve
org.meteoinfo.jts.edgegraph
org.meteoinfo.jts.geom
org.meteoinfo.jts.geom.prep
org.meteoinfo.jts.geom.util
org.meteoinfo.jts.geomgraph
org.meteoinfo.jts.io
org.meteoinfo.jts.io.gml2
org.meteoinfo.jts.io.kml
org.meteoinfo.jts.linearref
org.meteoinfo.jts.noding
org.meteoinfo.jts.operation
org.meteoinfo.jts.operation.buffer
org.meteoinfo.jts.operation.buffer.validate
org.meteoinfo.jts.operation.distance
org.meteoinfo.jts.operation.distance3d
org.meteoinfo.jts.operation.linemerge
org.meteoinfo.jts.operation.overlay
org.meteoinfo.jts.operation.overlay.snap
org.meteoinfo.jts.operation.overlay.validate
org.meteoinfo.jts.operation.polygonize
org.meteoinfo.jts.operation.predicate
org.meteoinfo.jts.operation.relate
org.meteoinfo.jts.operation.union
org.meteoinfo.jts.operation.valid
org.meteoinfo.jts.precision
org.meteoinfo.jts.shape
org.meteoinfo.jts.shape.fractal
org.meteoinfo.jts.shape.random
org.meteoinfo.jts.simplify
org.meteoinfo.jts.triangulate
org.meteoinfo.jts.triangulate.quadedge
org.meteoinfo.jts.util
org.meteoinfo.shape

Uses of Geometry in org.meteoinfo.chart

Methods in org.meteoinfo.chart that return Geometry

Modifier and Type	Method	Description
Geometry	ChartText.toGeometry(GeometryFactory factory)	To geometry method

Uses of Geometry in org.meteoinfo.jts.algorithm

Methods in org.meteoinfo.jts.algorithm that return Geometry

Modifier and Type	Method	Description
Geometry	MinimumBoundingCircle.getCircle()	Gets a geometry which represents the Minimum Bounding Circle.
Geometry	ConvexHull.getConvexHull()	Returns a Geometry that represents the convex hull of the input geometry.
Geometry	MinimumBoundingCircle.getDiameter()	Gets a geometry representing the diameter of the computed Minimum Bounding Circle.
Geometry	MinimumBoundingCircle.getFarthestPoints()	Gets a geometry representing a line between the two farthest points in the input.
static Geometry	MinimumDiameter.getMinimumDiameter(Geometry geom)	Gets the length of the minimum diameter enclosing a geometry
Geometry	MinimumDiameter.getMinimumRectangle()	Gets the minimum rectangular Polygon which encloses the input geometry.
static Geometry	MinimumDiameter.getMinimumRectangle(Geometry geom)	Gets the minimum rectangle enclosing a geometry.

Methods in org.meteoinfo.jts.algorithm with parameters of type Geometry

Modifier and Type	Method	Description
void	CentroidArea.add(Geometry geom)	Deprecated. Adds the area defined by a Geometry to the centroid total.
void	CentroidLine.add(Geometry geom)	Deprecated. Adds the linear components of by a Geometry to the centroid total.
void	CentroidPoint.add(Geometry geom)	Deprecated. Adds the point(s) defined by a Geometry to the centroid total.
static Coordinate	Centroid.getCentroid(Geometry geom)	Computes the centroid point of a geometry.
static Geometry	MinimumDiameter.getMinimumDiameter(Geometry geom)	Gets the length of the minimum diameter enclosing a geometry
static Geometry	MinimumDiameter.getMinimumRectangle(Geometry geom)	Gets the minimum rectangle enclosing a geometry.
protected LineString	InteriorPointArea.horizontalBisector(Geometry geometry)
boolean	PointLocator.intersects(Coordinate p, Geometry geom)	Convenience method to test a point for intersection with a Geometry
int	PointLocator.locate(Coordinate p, Geometry geom)	Computes the topological relationship (Location) of a single point to a Geometry.

Constructors in org.meteoinfo.jts.algorithm with parameters of type Geometry

Constructor	Description
Centroid(Geometry geom)	Creates a new instance for computing the centroid of a geometry
ConvexHull(Geometry geometry)	Create a new convex hull construction for the input Geometry.
InteriorPointArea(Geometry g)	Creates a new interior point finder for an areal geometry.
InteriorPointLine(Geometry g)
InteriorPointPoint(Geometry g)
MinimumBoundingCircle(Geometry geom)	Creates a new object for computing the minimum bounding circle for the point set defined by the vertices of the given geometry.
MinimumDiameter(Geometry inputGeom)	Compute a minimum diameter for a given Geometry.
MinimumDiameter(Geometry inputGeom, boolean isConvex)	Compute a minimum diameter for a giver Geometry, with a hint if the Geometry is convex (e.g.

Uses of Geometry in org.meteoinfo.jts.algorithm.distance

Methods in org.meteoinfo.jts.algorithm.distance with parameters of type Geometry

Modifier and Type	Method	Description
static void	DistanceToPoint.computeDistance(Geometry geom, Coordinate pt, PointPairDistance ptDist)
static double	DiscreteHausdorffDistance.distance(Geometry g0, Geometry g1)
static double	DiscreteHausdorffDistance.distance(Geometry g0, Geometry g1, double densifyFrac)

Constructors in org.meteoinfo.jts.algorithm.distance with parameters of type Geometry

Constructor	Description
DiscreteHausdorffDistance(Geometry g0, Geometry g1)
MaxDensifiedByFractionDistanceFilter(Geometry geom, double fraction)
MaxPointDistanceFilter(Geometry geom)

Uses of Geometry in org.meteoinfo.jts.algorithm.locate

Methods in org.meteoinfo.jts.algorithm.locate with parameters of type Geometry

Modifier and Type	Method	Description
static int	SimplePointInAreaLocator.locate(Coordinate p, Geometry geom)	Determines the Location of a point in an areal Geometry.

Constructors in org.meteoinfo.jts.algorithm.locate with parameters of type Geometry

Constructor	Description
IndexedPointInAreaLocator(Geometry g)	Creates a new locator for a given Geometry
SimplePointInAreaLocator(Geometry geom)

Uses of Geometry in org.meteoinfo.jts.algorithm.match

Methods in org.meteoinfo.jts.algorithm.match with parameters of type Geometry

Modifier and Type	Method	Description
double	AreaSimilarityMeasure.measure(Geometry g1, Geometry g2)
double	HausdorffSimilarityMeasure.measure(Geometry g1, Geometry g2)
double	SimilarityMeasure.measure(Geometry g1, Geometry g2)

Uses of Geometry in org.meteoinfo.jts.awt

Methods in org.meteoinfo.jts.awt that return Geometry

Modifier and Type	Method	Description
static Geometry	FontGlyphReader.read(java.lang.String text, java.awt.Font font, double flatness, GeometryFactory geomFact)	Converts text rendered in the given Font to a Geometry
static Geometry	FontGlyphReader.read(java.lang.String text, java.awt.Font font, GeometryFactory geomFact)	Converts text rendered in the given Font to a Geometry using a standard flatness factor.
static Geometry	FontGlyphReader.read(java.lang.String text, java.lang.String fontName, int pointSize, GeometryFactory geomFact)	Converts text rendered in the given font and pointsize to a Geometry using a standard flatness factor.
Geometry	ShapeReader.read(java.awt.geom.PathIterator pathIt)	Converts a flat path to a Geometry.
static Geometry	ShapeReader.read(java.awt.geom.PathIterator pathIt, GeometryFactory geomFact)	Converts a flat path to a Geometry.
static Geometry	ShapeReader.read(java.awt.Shape shp, double flatness, GeometryFactory geomFact)	Converts a Shape to a Geometry, flattening it first.

Methods in org.meteoinfo.jts.awt with parameters of type Geometry

Modifier and Type	Method	Description
java.awt.Shape	ShapeWriter.toShape(Geometry geometry)	Creates a Shape representing a Geometry, according to the specified PointTransformation and PointShapeFactory (if relevant).

Uses of Geometry in org.meteoinfo.jts.densify

Methods in org.meteoinfo.jts.densify that return Geometry

Modifier and Type	Method	Description
static Geometry	Densifier.densify(Geometry geom, double distanceTolerance)	Densifies a geometry using a given distance tolerance, and respecting the input geometry's PrecisionModel.
Geometry	Densifier.getResultGeometry()	Gets the densified geometry.

Methods in org.meteoinfo.jts.densify with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	Densifier.densify(Geometry geom, double distanceTolerance)	Densifies a geometry using a given distance tolerance, and respecting the input geometry's PrecisionModel.

Constructors in org.meteoinfo.jts.densify with parameters of type Geometry

Constructor	Description
Densifier(Geometry inputGeom)	Creates a new densifier instance.

Uses of Geometry in org.meteoinfo.jts.dissolve

Methods in org.meteoinfo.jts.dissolve that return Geometry

Modifier and Type	Method	Description
static Geometry	LineDissolver.dissolve(Geometry g)	Dissolves the linear components in a geometry.
Geometry	LineDissolver.getResult()	Gets the dissolved result as a MultiLineString.

Methods in org.meteoinfo.jts.dissolve with parameters of type Geometry

Modifier and Type	Method	Description
void	LineDissolver.add(Geometry geometry)	Adds a Geometry to be dissolved.
static Geometry	LineDissolver.dissolve(Geometry g)	Dissolves the linear components in a geometry.

Uses of Geometry in org.meteoinfo.jts.edgegraph

Methods in org.meteoinfo.jts.edgegraph with parameters of type Geometry

Modifier and Type	Method	Description
void	EdgeGraphBuilder.add(Geometry geometry)	Adds the edges of a Geometry to the graph.

Uses of Geometry in org.meteoinfo.jts.geom

Subclasses of Geometry in org.meteoinfo.jts.geom

Modifier and Type	Class	Description
class	GeometryCollection	Models a collection of Geometrys of arbitrary type and dimension.
class	LinearRing	Models an OGC SFS LinearRing.
class	LineString	Models an OGC-style LineString.
class	MultiLineString	Models a collection of (@link LineString}s.
class	MultiPoint	Models a collection of Points.
class	MultiPolygon	Models a collection of Polygons.
class	Point	Represents a single point.
class	Polygon	Represents a polygon with linear edges, which may include holes.

Fields in org.meteoinfo.jts.geom declared as Geometry

Modifier and Type	Field	Description
protected Geometry[]	GeometryCollection.geometries	Internal representation of this GeometryCollection.

Methods in org.meteoinfo.jts.geom that return Geometry

Modifier and Type	Method	Description
Geometry	Geometry.buffer(double distance)	Computes a buffer area around this geometry having the given width.
Geometry	Geometry.buffer(double distance, int quadrantSegments)	Computes a buffer area around this geometry having the given width and with a specified accuracy of approximation for circular arcs.
Geometry	Geometry.buffer(double distance, int quadrantSegments, int endCapStyle)	Computes a buffer area around this geometry having the given width and with a specified accuracy of approximation for circular arcs, and using a specified end cap style.
Geometry	GeometryFactory.buildGeometry(java.util.Collection geomList)	Build an appropriate Geometry, MultiGeometry, or GeometryCollection to contain the Geometrys in it.
Geometry	Geometry.convexHull()	Computes the smallest convex Polygon that contains all the points in the Geometry.
Geometry	Polygon.convexHull()
Geometry	GeometryFactory.createGeometry(Geometry g)	Creates a deep copy of the input Geometry.
Geometry	Geometry.difference(Geometry other)	Computes a Geometry representing the closure of the point-set of the points contained in this Geometry that are not contained in the other Geometry.
abstract Geometry	Geometry.getBoundary()	Returns the boundary, or an empty geometry of appropriate dimension if this Geometry is empty.
Geometry	GeometryCollection.getBoundary()
Geometry	LineString.getBoundary()	Gets the boundary of this geometry.
Geometry	MultiLineString.getBoundary()	Gets the boundary of this geometry.
Geometry	MultiPoint.getBoundary()	Gets the boundary of this geometry.
Geometry	MultiPolygon.getBoundary()	Computes the boundary of this geometry
Geometry	Point.getBoundary()	Gets the boundary of this geometry.
Geometry	Polygon.getBoundary()	Computes the boundary of this geometry
Geometry	Geometry.getEnvelope()	Gets a Geometry representing the envelope (bounding box) of this Geometry.
Geometry	Geometry.getGeometryN(int n)	Returns an element Geometry from a GeometryCollection (or this, if the geometry is not a collection).
Geometry	GeometryCollection.getGeometryN(int n)
Geometry	Geometry.intersection(Geometry other)	Computes a Geometry representing the point-set which is common to both this Geometry and the other Geometry.
Geometry	Geometry.norm()	Creates a new Geometry which is a normalized copy of this Geometry.
static Geometry	OctagonalEnvelope.octagonalEnvelope(Geometry geom)	Gets the octagonal envelope of a geometry
abstract Geometry	Geometry.reverse()	Computes a new geometry which has all component coordinate sequences in reverse order (opposite orientation) to this one.
Geometry	GeometryCollection.reverse()	Creates a GeometryCollection with every component reversed.
Geometry	LinearRing.reverse()
Geometry	LineString.reverse()	Creates a LineString whose coordinates are in the reverse order of this objects
Geometry	MultiLineString.reverse()	Creates a MultiLineString in the reverse order to this object.
Geometry	MultiPolygon.reverse()	Creates a MultiPolygon with every component reversed.
Geometry	Point.reverse()
Geometry	Polygon.reverse()
Geometry	Geometry.symDifference(Geometry other)	Computes a Geometry representing the closure of the point-set which is the union of the points in this Geometry which are not contained in the other Geometry, with the points in the other Geometry not contained in this Geometry.
Geometry	GeometryFactory.toGeometry(Envelope envelope)	Creates a Geometry with the same extent as the given envelope.
Geometry	OctagonalEnvelope.toGeometry(GeometryFactory geomFactory)
static Geometry[]	GeometryFactory.toGeometryArray(java.util.Collection geometries)	Converts the List to an array.
Geometry	Geometry.union()	Computes the union of all the elements of this geometry.
Geometry	Geometry.union(Geometry other)	Computes a Geometry representing the point-set which is contained in both this Geometry and the other Geometry.

Methods in org.meteoinfo.jts.geom with parameters of type Geometry

Modifier and Type	Method	Description
protected void	Geometry.checkNotGeometryCollection(Geometry g)	Throws an exception if g's class is GeometryCollection .
boolean	Geometry.contains(Geometry g)	Tests whether this geometry contains the argument geometry.
boolean	Geometry.coveredBy(Geometry g)	Tests whether this geometry is covered by the argument geometry.
boolean	Geometry.covers(Geometry g)	Tests whether this geometry covers the argument geometry.
Geometry	GeometryFactory.createGeometry(Geometry g)	Creates a deep copy of the input Geometry.
GeometryCollection	GeometryFactory.createGeometryCollection(Geometry[] geometries)	Creates a GeometryCollection using the given Geometries; a null or empty array will create an empty GeometryCollection.
static Point	GeometryFactory.createPointFromInternalCoord(Coordinate coord, Geometry exemplar)
boolean	Geometry.crosses(Geometry g)	Tests whether this geometry crosses the argument geometry.
Geometry	Geometry.difference(Geometry other)	Computes a Geometry representing the closure of the point-set of the points contained in this Geometry that are not contained in the other Geometry.
boolean	Geometry.disjoint(Geometry g)	Tests whether this geometry is disjoint from the argument geometry.
double	Geometry.distance(Geometry g)	Returns the minimum distance between this Geometry and another Geometry.
boolean	Geometry.equals(Geometry g)	Tests whether this geometry is topologically equal to the argument geometry.
boolean	Geometry.equalsExact(Geometry other)	Returns true if the two Geometrys are exactly equal.
abstract boolean	Geometry.equalsExact(Geometry other, double tolerance)	Returns true if the two Geometrys are exactly equal, up to a specified distance tolerance.
boolean	GeometryCollection.equalsExact(Geometry other, double tolerance)
boolean	LineString.equalsExact(Geometry other, double tolerance)
boolean	MultiLineString.equalsExact(Geometry other, double tolerance)
boolean	MultiPoint.equalsExact(Geometry other, double tolerance)
boolean	MultiPolygon.equalsExact(Geometry other, double tolerance)
boolean	Point.equalsExact(Geometry other, double tolerance)
boolean	Polygon.equalsExact(Geometry other, double tolerance)
boolean	Geometry.equalsNorm(Geometry g)	Tests whether two geometries are exactly equal in their normalized forms.
boolean	Geometry.equalsTopo(Geometry g)	Tests whether this geometry is topologically equal to the argument geometry as defined by the SFS equals predicate.
void	OctagonalEnvelope.expandToInclude(Geometry g)
void	GeometryComponentFilter.filter(Geometry geom)	Performs an operation with or on geom.
void	GeometryFilter.filter(Geometry geom)	Performs an operation with or on geom.
protected static boolean	Geometry.hasNonEmptyElements(Geometry[] geometries)	Returns true if the array contains any non-empty Geometrys.
Geometry	Geometry.intersection(Geometry other)	Computes a Geometry representing the point-set which is common to both this Geometry and the other Geometry.
boolean	Geometry.intersects(Geometry g)	Tests whether this geometry intersects the argument geometry.
protected boolean	Geometry.isEquivalentClass(Geometry other)	Returns whether the two Geometrys are equal, from the point of view of the equalsExact method.
protected boolean	LineString.isEquivalentClass(Geometry other)
boolean	Geometry.isWithinDistance(Geometry geom, double distance)	Tests whether the distance from this Geometry to another is less than or equal to a specified value.
static Geometry	OctagonalEnvelope.octagonalEnvelope(Geometry geom)	Gets the octagonal envelope of a geometry
boolean	Geometry.overlaps(Geometry g)	Tests whether this geometry overlaps the specified geometry.
IntersectionMatrix	Geometry.relate(Geometry g)	Returns the DE-9IM IntersectionMatrix for the two Geometrys.
boolean	Geometry.relate(Geometry g, java.lang.String intersectionPattern)	Tests whether the elements in the DE-9IM IntersectionMatrix for the two Geometrys match the elements in intersectionPattern.
Geometry	Geometry.symDifference(Geometry other)	Computes a Geometry representing the closure of the point-set which is the union of the points in this Geometry which are not contained in the other Geometry, with the points in the other Geometry not contained in this Geometry.
boolean	Geometry.touches(Geometry g)	Tests whether this geometry touches the argument geometry.
Geometry	Geometry.union(Geometry other)	Computes a Geometry representing the point-set which is contained in both this Geometry and the other Geometry.
boolean	Geometry.within(Geometry g)	Tests whether this geometry is within the specified geometry.

Constructors in org.meteoinfo.jts.geom with parameters of type Geometry

Constructor	Description
GeometryCollection(Geometry[] geometries, GeometryFactory factory)
GeometryCollection(Geometry[] geometries, PrecisionModel precisionModel, int SRID)	Deprecated. Use GeometryFactory instead
GeometryCollectionIterator(Geometry parent)	Constructs an iterator over the given Geometry.
OctagonalEnvelope(Geometry geom)	Creates a new null bounding octagon bounding a Geometry

Uses of Geometry in org.meteoinfo.jts.geom.prep

Methods in org.meteoinfo.jts.geom.prep that return Geometry

Modifier and Type	Method	Description
Geometry	PreparedGeometry.getGeometry()	Gets the original Geometry which has been prepared.

Methods in org.meteoinfo.jts.geom.prep with parameters of type Geometry

Modifier and Type	Method	Description
boolean	PreparedGeometry.contains(Geometry geom)	Tests whether the base Geometry contains a given geometry.
boolean	PreparedPolygon.contains(Geometry g)
boolean	PreparedGeometry.containsProperly(Geometry geom)	Tests whether the base Geometry properly contains a given geometry.
boolean	PreparedPolygon.containsProperly(Geometry g)
boolean	PreparedGeometry.coveredBy(Geometry geom)	Tests whether the base Geometry is covered by a given geometry.
boolean	PreparedGeometry.covers(Geometry geom)	Tests whether the base Geometry covers a given geometry.
boolean	PreparedPolygon.covers(Geometry g)
PreparedGeometry	PreparedGeometryFactory.create(Geometry geom)	Creates a new PreparedGeometry appropriate for the argument Geometry.
boolean	PreparedGeometry.crosses(Geometry geom)	Tests whether the base Geometry crosses a given geometry.
boolean	PreparedGeometry.disjoint(Geometry geom)	Tests whether the base Geometry is disjoint from a given geometry.
boolean	PreparedGeometry.intersects(Geometry geom)	Tests whether the base Geometry intersects a given geometry.
boolean	PreparedLineString.intersects(Geometry g)
boolean	PreparedPoint.intersects(Geometry g)	Tests whether this point intersects a Geometry.
boolean	PreparedPolygon.intersects(Geometry g)
boolean	PreparedGeometry.overlaps(Geometry geom)	Tests whether the base Geometry overlaps a given geometry.
static PreparedGeometry	PreparedGeometryFactory.prepare(Geometry geom)	Creates a new PreparedGeometry appropriate for the argument Geometry.
boolean	PreparedGeometry.touches(Geometry geom)	Tests whether the base Geometry touches a given geometry.
boolean	PreparedGeometry.within(Geometry geom)	Tests whether the base Geometry is within a given geometry.

Uses of Geometry in org.meteoinfo.jts.geom.util

Methods in org.meteoinfo.jts.geom.util that return Geometry

Modifier and Type	Method	Description
Geometry	GeometryCombiner.combine()	Computes the combination of the input geometries to produce the most appropriate Geometry or GeometryCollection
static Geometry	GeometryCombiner.combine(java.util.Collection geoms)	Combines a collection of geometries.
static Geometry	GeometryCombiner.combine(Geometry g0, Geometry g1)	Combines two geometries.
static Geometry	GeometryCombiner.combine(Geometry g0, Geometry g1, Geometry g2)	Combines three geometries.
Geometry	SineStarFactory.createSineStar()	Generates the geometry for the sine star
Geometry	GeometryEditor.CoordinateOperation.edit(Geometry geometry, GeometryFactory factory)
Geometry	GeometryEditor.CoordinateSequenceOperation.edit(Geometry geometry, GeometryFactory factory)
Geometry	GeometryEditor.edit(Geometry geometry, GeometryEditor.GeometryEditorOperation operation)	Edit the input Geometry with the given edit operation.
Geometry	GeometryEditor.GeometryEditorOperation.edit(Geometry geometry, GeometryFactory factory)	Edits a Geometry by returning a new Geometry with a modification.
Geometry	GeometryEditor.NoOpGeometryOperation.edit(Geometry geometry, GeometryFactory factory)
static Geometry	LinearComponentExtracter.getGeometry(Geometry geom)	Extracts the linear components from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
static Geometry	LinearComponentExtracter.getGeometry(Geometry geom, boolean forceToLineString)	Extracts the linear components from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
static Geometry	LineStringExtracter.getGeometry(Geometry geom)	Extracts the LineString elements from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
Geometry	GeometryTransformer.getInputGeometry()	Utility function to make input geometry available
static Geometry	GeometryMapper.map(Geometry geom, GeometryMapper.MapOp op)	Maps the members of a Geometry (which may be atomic or composite) into another Geometry of most specific type.
Geometry	GeometryMapper.MapOp.map(Geometry g)	Computes a new geometry value.
Geometry	AffineTransformation.transform(Geometry g)	Cretaes a new @link Geometry which is the result of this transformation applied to the input Geometry.
Geometry	GeometryTransformer.transform(Geometry inputGeom)
protected Geometry	GeometryTransformer.transformGeometryCollection(GeometryCollection geom, Geometry parent)
protected Geometry	GeometryTransformer.transformLinearRing(LinearRing geom, Geometry parent)	Transforms a LinearRing.
protected Geometry	GeometryTransformer.transformLineString(LineString geom, Geometry parent)	Transforms a LineString geometry.
protected Geometry	GeometryTransformer.transformMultiLineString(MultiLineString geom, Geometry parent)
protected Geometry	GeometryTransformer.transformMultiPoint(MultiPoint geom, Geometry parent)
protected Geometry	GeometryTransformer.transformMultiPolygon(MultiPolygon geom, Geometry parent)
protected Geometry	GeometryTransformer.transformPoint(Point geom, Geometry parent)
protected Geometry	GeometryTransformer.transformPolygon(Polygon geom, Geometry parent)

Methods in org.meteoinfo.jts.geom.util with parameters of type Geometry

Modifier and Type	Method	Description
void	ShortCircuitedGeometryVisitor.applyTo(Geometry geom)
static Geometry	GeometryCombiner.combine(Geometry g0, Geometry g1)	Combines two geometries.
static Geometry	GeometryCombiner.combine(Geometry g0, Geometry g1, Geometry g2)	Combines three geometries.
abstract Coordinate[]	GeometryEditor.CoordinateOperation.edit(Coordinate[] coordinates, Geometry geometry)	Edits the array of Coordinates from a Geometry.
Geometry	GeometryEditor.CoordinateOperation.edit(Geometry geometry, GeometryFactory factory)
abstract CoordinateSequence	GeometryEditor.CoordinateSequenceOperation.edit(CoordinateSequence coordSeq, Geometry geometry)	Edits a CoordinateSequence from a Geometry.
Geometry	GeometryEditor.CoordinateSequenceOperation.edit(Geometry geometry, GeometryFactory factory)
Geometry	GeometryEditor.edit(Geometry geometry, GeometryEditor.GeometryEditorOperation operation)	Edit the input Geometry with the given edit operation.
Geometry	GeometryEditor.GeometryEditorOperation.edit(Geometry geometry, GeometryFactory factory)	Edits a Geometry by returning a new Geometry with a modification.
Geometry	GeometryEditor.NoOpGeometryOperation.edit(Geometry geometry, GeometryFactory factory)
static java.util.List	GeometryExtracter.extract(Geometry geom, java.lang.Class clz)	Extracts the components of type clz from a Geometry and returns them in a List.
static java.util.List	GeometryExtracter.extract(Geometry geom, java.lang.Class clz, java.util.List list)	Extracts the components of type clz from a Geometry and adds them to the provided List.
void	ComponentCoordinateExtracter.filter(Geometry geom)
void	GeometryExtracter.filter(Geometry geom)
void	LinearComponentExtracter.filter(Geometry geom)
void	LineStringExtracter.filter(Geometry geom)
void	PointExtracter.filter(Geometry geom)
void	PolygonExtracter.filter(Geometry geom)
static java.util.List	ComponentCoordinateExtracter.getCoordinates(Geometry geom)	Extracts the linear components from a single geometry.
static Geometry	LinearComponentExtracter.getGeometry(Geometry geom)	Extracts the linear components from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
static Geometry	LinearComponentExtracter.getGeometry(Geometry geom, boolean forceToLineString)	Extracts the linear components from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
static Geometry	LineStringExtracter.getGeometry(Geometry geom)	Extracts the LineString elements from a single Geometry and returns them as either a {@link LineString) or {@link MultiLineString}.
static java.util.List	LinearComponentExtracter.getLines(Geometry geom)	Extracts the linear components from a single geometry.
static java.util.List	LinearComponentExtracter.getLines(Geometry geom, boolean forceToLineString)	Extracts the linear components from a single geometry.
static java.util.Collection	LinearComponentExtracter.getLines(Geometry geom, java.util.Collection lines)	Extracts the linear components from a single Geometry and adds them to the provided Collection.
static java.util.Collection	LinearComponentExtracter.getLines(Geometry geom, java.util.Collection lines, boolean forceToLineString)	Extracts the linear components from a single Geometry and adds them to the provided Collection.
static java.util.List	LineStringExtracter.getLines(Geometry geom)	Extracts the LineString elements from a single Geometry and returns them in a List.
static java.util.List	LineStringExtracter.getLines(Geometry geom, java.util.List lines)	Extracts the LineString elements from a single Geometry and adds them to the provided List.
static java.util.List	PointExtracter.getPoints(Geometry geom)	Extracts the Point elements from a single Geometry and returns them in a List.
static java.util.List	PointExtracter.getPoints(Geometry geom, java.util.List list)	Extracts the Point elements from a single Geometry and adds them to the provided List.
static java.util.List	PolygonExtracter.getPolygons(Geometry geom)	Extracts the Polygon elements from a single Geometry and returns them in a List.
static java.util.List	PolygonExtracter.getPolygons(Geometry geom, java.util.List list)	Extracts the Polygon elements from a single Geometry and adds them to the provided List.
static Geometry	GeometryMapper.map(Geometry geom, GeometryMapper.MapOp op)	Maps the members of a Geometry (which may be atomic or composite) into another Geometry of most specific type.
Geometry	GeometryMapper.MapOp.map(Geometry g)	Computes a new geometry value.
Geometry	AffineTransformation.transform(Geometry g)	Cretaes a new @link Geometry which is the result of this transformation applied to the input Geometry.
Geometry	GeometryTransformer.transform(Geometry inputGeom)
protected CoordinateSequence	GeometryTransformer.transformCoordinates(CoordinateSequence coords, Geometry parent)	Transforms a CoordinateSequence.
protected Geometry	GeometryTransformer.transformGeometryCollection(GeometryCollection geom, Geometry parent)
protected Geometry	GeometryTransformer.transformLinearRing(LinearRing geom, Geometry parent)	Transforms a LinearRing.
protected Geometry	GeometryTransformer.transformLineString(LineString geom, Geometry parent)	Transforms a LineString geometry.
protected Geometry	GeometryTransformer.transformMultiLineString(MultiLineString geom, Geometry parent)
protected Geometry	GeometryTransformer.transformMultiPoint(MultiPoint geom, Geometry parent)
protected Geometry	GeometryTransformer.transformMultiPolygon(MultiPolygon geom, Geometry parent)
protected Geometry	GeometryTransformer.transformPoint(Point geom, Geometry parent)
protected Geometry	GeometryTransformer.transformPolygon(Polygon geom, Geometry parent)
protected abstract void	ShortCircuitedGeometryVisitor.visit(Geometry element)

Uses of Geometry in org.meteoinfo.jts.geomgraph

Methods in org.meteoinfo.jts.geomgraph that return Geometry

Modifier and Type	Method	Description
Geometry	GeometryGraph.getGeometry()

Constructors in org.meteoinfo.jts.geomgraph with parameters of type Geometry

Constructor	Description
GeometryGraph(int argIndex, Geometry parentGeom)
GeometryGraph(int argIndex, Geometry parentGeom, BoundaryNodeRule boundaryNodeRule)

Uses of Geometry in org.meteoinfo.jts.io

Methods in org.meteoinfo.jts.io that return Geometry

Modifier and Type	Method	Description
Geometry	WKBReader.read(byte[] bytes)	Reads a single Geometry in WKB format from a byte array.
Geometry	WKBReader.read(InStream is)	Reads a Geometry in binary WKB format from an InStream.
Geometry	WKTReader.read(java.io.Reader reader)	Reads a Well-Known Text representation of a Geometry from a Reader.
Geometry	WKTReader.read(java.lang.String wellKnownText)	Reads a Well-Known Text representation of a Geometry from a String.

Methods in org.meteoinfo.jts.io with parameters of type Geometry

Modifier and Type	Method	Description
byte[]	WKBWriter.write(Geometry geom)	Writes a Geometry into a byte array.
void	WKBWriter.write(Geometry geom, OutStream os)	Writes a Geometry to an OutStream.
java.lang.String	WKTWriter.write(Geometry geometry)	Converts a Geometry to its Well-known Text representation.
void	WKTWriter.write(Geometry geometry, java.io.Writer writer)	Converts a Geometry to its Well-known Text representation.
java.lang.String	WKTWriter.writeFormatted(Geometry geometry)	Same as write, but with newlines and spaces to make the well-known text more readable.
void	WKTWriter.writeFormatted(Geometry geometry, java.io.Writer writer)	Same as write, but with newlines and spaces to make the well-known text more readable.

Uses of Geometry in org.meteoinfo.jts.io.gml2

Methods in org.meteoinfo.jts.io.gml2 that return Geometry

Modifier and Type	Method	Description
Geometry	GMLHandler.getGeometry()	Gets the geometry parsed by this handler.
Geometry	GMLReader.read(java.io.Reader reader, GeometryFactory geometryFactory)	Reads a GML2 Geometry from a Reader into a single Geometry If a collection of Geometries is found, a GeometryCollection is returned.
Geometry	GMLReader.read(java.lang.String gml, GeometryFactory geometryFactory)	Reads a GML2 Geometry from a String into a single Geometry If a collection of geometries is found, a GeometryCollection is returned.

Methods in org.meteoinfo.jts.io.gml2 with parameters of type Geometry

Modifier and Type	Method	Description
java.lang.String	GMLWriter.write(Geometry geom)	Writes a Geometry in GML2 format to a String.
void	GMLWriter.write(Geometry geom, java.io.Writer writer)	Writes a Geometry in GML2 format into a Writer.

Uses of Geometry in org.meteoinfo.jts.io.kml

Methods in org.meteoinfo.jts.io.kml with parameters of type Geometry

Modifier and Type	Method	Description
java.lang.String	KMLWriter.write(Geometry geom)	Writes a Geometry in KML format as a string.
void	KMLWriter.write(Geometry geometry, java.io.Writer writer)	Writes the KML representation of a Geometry to a Writer.
void	KMLWriter.write(Geometry geometry, java.lang.StringBuffer buf)	Appends the KML representation of a Geometry to a StringBuffer.
static java.lang.String	KMLWriter.writeGeometry(Geometry geometry, double z)	Writes a Geometry as KML to a string, using a specified Z value.
static java.lang.String	KMLWriter.writeGeometry(Geometry geometry, double z, int precision, boolean extrude, java.lang.String altitudeMode)	Writes a Geometry as KML to a string, using a specified Z value, precision, extrude flag, and altitude mode code.

Uses of Geometry in org.meteoinfo.jts.linearref

Methods in org.meteoinfo.jts.linearref that return Geometry

Modifier and Type	Method	Description
Geometry	LengthIndexedLine.extractLine(double startIndex, double endIndex)	Computes the LineString for the interval on the line between the given indices.
Geometry	LocationIndexedLine.extractLine(LinearLocation startIndex, LinearLocation endIndex)	Computes the LineString for the interval on the line between the given indices.
Geometry	LinearGeometryBuilder.getGeometry()

Methods in org.meteoinfo.jts.linearref with parameters of type Geometry

Modifier and Type	Method	Description
void	LinearLocation.clamp(Geometry linear)	Ensures the indexes are valid for a given linear Geometry.
Coordinate	LinearLocation.getCoordinate(Geometry linearGeom)	Gets the Coordinate along the given linear Geometry which is referenced by this location.
static LinearLocation	LinearLocation.getEndLocation(Geometry linear)	Gets a location which refers to the end of a linear Geometry.
static double	LengthLocationMap.getLength(Geometry linearGeom, LinearLocation loc)	Computes the length for a given LinearLocation on a linear Geometry.
static LinearLocation	LengthLocationMap.getLocation(Geometry linearGeom, double length)	Computes the LinearLocation for a given length along a linear Geometry.
static LinearLocation	LengthLocationMap.getLocation(Geometry linearGeom, double length, boolean resolveLower)	Computes the LinearLocation for a given length along a linear Geometry, with control over how the location is resolved at component endpoints.
LineSegment	LinearLocation.getSegment(Geometry linearGeom)	Gets a LineSegment representing the segment of the given linear Geometry which contains this location.
double	LinearLocation.getSegmentLength(Geometry linearGeom)	Gets the length of the segment in the given Geometry containing this location.
double[]	LengthIndexedLine.indicesOf(Geometry subLine)	Computes the indices for a subline of the line.
LinearLocation[]	LocationIndexedLine.indicesOf(Geometry subLine)	Computes the indices for a subline of the line.
boolean	LinearLocation.isEndpoint(Geometry linearGeom)	Tests whether this location is an endpoint of the linear component it refers to.
boolean	LinearLocation.isValid(Geometry linearGeom)	Tests whether this location refers to a valid location on the given linear Geometry.
void	LinearLocation.setToEnd(Geometry linear)	Sets the value of this location to refer to the end of a linear geometry.
void	LinearLocation.snapToVertex(Geometry linearGeom, double minDistance)	Snaps the value of this location to the nearest vertex on the given linear Geometry, if the vertex is closer than minDistance.
LinearLocation	LinearLocation.toLowest(Geometry linearGeom)	Converts a linear location to the lowest equivalent location index.

Constructors in org.meteoinfo.jts.linearref with parameters of type Geometry

Constructor	Description
LengthIndexedLine(Geometry linearGeom)	Constructs an object which allows a linear Geometry to be linearly referenced using length as an index.
LengthLocationMap(Geometry linearGeom)
LinearIterator(Geometry linear)	Creates an iterator initialized to the start of a linear Geometry
LinearIterator(Geometry linearGeom, int componentIndex, int vertexIndex)	Creates an iterator starting at a specified component and vertex in a linear Geometry
LinearIterator(Geometry linear, LinearLocation start)	Creates an iterator starting at a LinearLocation on a linear Geometry
LocationIndexedLine(Geometry linearGeom)	Constructs an object which allows linear referencing along a given linear Geometry.

Uses of Geometry in org.meteoinfo.jts.noding

Methods in org.meteoinfo.jts.noding that return Geometry

Modifier and Type	Method	Description
static Geometry	SegmentStringUtil.toGeometry(java.util.Collection segStrings, GeometryFactory geomFact)	Converts a collection of SegmentStrings into a Geometry.

Methods in org.meteoinfo.jts.noding with parameters of type Geometry

Modifier and Type	Method	Description
static java.util.List	SegmentStringUtil.extractNodedSegmentStrings(Geometry geom)	Extracts all linear components from a given Geometry to SegmentStrings.
static java.util.List	SegmentStringUtil.extractSegmentStrings(Geometry geom)	Extracts all linear components from a given Geometry to SegmentStrings.

Uses of Geometry in org.meteoinfo.jts.operation

Methods in org.meteoinfo.jts.operation that return Geometry

Modifier and Type	Method	Description
Geometry	GeometryGraphOperation.getArgGeometry(int i)
Geometry	BoundaryOp.getBoundary()
static Geometry	BoundaryOp.getBoundary(Geometry g)
static Geometry	BoundaryOp.getBoundary(Geometry g, BoundaryNodeRule bnRule)

Methods in org.meteoinfo.jts.operation with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	BoundaryOp.getBoundary(Geometry g)
static Geometry	BoundaryOp.getBoundary(Geometry g, BoundaryNodeRule bnRule)

Constructors in org.meteoinfo.jts.operation with parameters of type Geometry

Constructor	Description
BoundaryOp(Geometry geom)
BoundaryOp(Geometry geom, BoundaryNodeRule bnRule)
GeometryGraphOperation(Geometry g0)
GeometryGraphOperation(Geometry g0, Geometry g1)
GeometryGraphOperation(Geometry g0, Geometry g1, BoundaryNodeRule boundaryNodeRule)
IsSimpleOp(Geometry geom)	Creates a simplicity checker using the default SFS Mod-2 Boundary Node Rule
IsSimpleOp(Geometry geom, BoundaryNodeRule boundaryNodeRule)	Creates a simplicity checker using a given BoundaryNodeRule

Uses of Geometry in org.meteoinfo.jts.operation.buffer

Methods in org.meteoinfo.jts.operation.buffer that return Geometry

Modifier and Type	Method	Description
static Geometry	BufferOp.bufferOp(Geometry g, double distance)	Computes the buffer of a geometry for a given buffer distance.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, int quadrantSegments)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, int quadrantSegments, int endCapStyle)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, BufferParameters params)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.
Geometry	BufferOp.getResultGeometry(double distance)	Returns the buffer computed for a geometry for a given buffer distance.

Methods in org.meteoinfo.jts.operation.buffer with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	BufferOp.bufferOp(Geometry g, double distance)	Computes the buffer of a geometry for a given buffer distance.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, int quadrantSegments)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, int quadrantSegments, int endCapStyle)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.
static Geometry	BufferOp.bufferOp(Geometry g, double distance, BufferParameters params)	Comutes the buffer for a geometry for a given buffer distance and accuracy of approximation.

Constructors in org.meteoinfo.jts.operation.buffer with parameters of type Geometry

Constructor	Description
BufferOp(Geometry g)	Initializes a buffer computation for the given geometry
BufferOp(Geometry g, BufferParameters bufParams)	Initializes a buffer computation for the given geometry with the given set of parameters
OffsetCurveSetBuilder(Geometry inputGeom, double distance, OffsetCurveBuilder curveBuilder)

Uses of Geometry in org.meteoinfo.jts.operation.buffer.validate

Methods in org.meteoinfo.jts.operation.buffer.validate that return Geometry

Modifier and Type	Method	Description
Geometry	BufferDistanceValidator.getErrorIndicator()	Gets a geometry which indicates the location and nature of a validation failure.
Geometry	BufferResultValidator.getErrorIndicator()	Gets a geometry which indicates the location and nature of a validation failure.

Methods in org.meteoinfo.jts.operation.buffer.validate with parameters of type Geometry

Modifier and Type	Method	Description
static void	DistanceToPointFinder.computeDistance(Geometry geom, Coordinate pt, PointPairDistance ptDist)
double	BufferCurveMaximumDistanceFinder.findDistance(Geometry bufferCurve)
static boolean	BufferResultValidator.isValid(Geometry g, double distance, Geometry result)
static java.lang.String	BufferResultValidator.isValidMsg(Geometry g, double distance, Geometry result)	Checks whether the geometry buffer is valid, and returns an error message if not.

Constructors in org.meteoinfo.jts.operation.buffer.validate with parameters of type Geometry

Constructor	Description
BufferCurveMaximumDistanceFinder(Geometry inputGeom)
BufferDistanceValidator(Geometry input, double bufDistance, Geometry result)
BufferResultValidator(Geometry input, double distance, Geometry result)
MaxMidpointDistanceFilter(Geometry geom)
MaxPointDistanceFilter(Geometry geom)

Uses of Geometry in org.meteoinfo.jts.operation.distance

Methods in org.meteoinfo.jts.operation.distance that return Geometry

Modifier and Type	Method	Description
Geometry	GeometryLocation.getGeometryComponent()	Returns the geometry component on (or in) which this location occurs.

Methods in org.meteoinfo.jts.operation.distance with parameters of type Geometry

Modifier and Type	Method	Description
static STRtree	FacetSequenceTreeBuilder.build(Geometry g)
static Coordinate[]	DistanceOp.closestPoints(Geometry g0, Geometry g1)	Deprecated. renamed to nearestPoints
static double	DistanceOp.distance(Geometry g0, Geometry g1)	Compute the distance between the nearest points of two geometries.
static double	IndexedFacetDistance.distance(Geometry g1, Geometry g2)	Computes the distance between two geometries using the indexed approach.
void	ConnectedElementLocationFilter.filter(Geometry geom)
void	ConnectedElementPointFilter.filter(Geometry geom)
static java.util.List	ConnectedElementPointFilter.getCoordinates(Geometry geom)	Returns a list containing a Coordinate from each Polygon, LineString, and Point found inside the specified geometry.
double	IndexedFacetDistance.getDistance(Geometry g)	Computes the distance from the base geometry to the given geometry.
static java.util.List	ConnectedElementLocationFilter.getLocations(Geometry geom)	Returns a list containing a point from each Polygon, LineString, and Point found inside the specified geometry.
static boolean	DistanceOp.isWithinDistance(Geometry g0, Geometry g1, double distance)	Test whether two geometries lie within a given distance of each other.
static Coordinate[]	DistanceOp.nearestPoints(Geometry g0, Geometry g1)	Compute the the nearest points of two geometries.

Constructors in org.meteoinfo.jts.operation.distance with parameters of type Geometry

Constructor	Description
DistanceOp(Geometry g0, Geometry g1)	Constructs a DistanceOp that computes the distance and nearest points between the two specified geometries.
DistanceOp(Geometry g0, Geometry g1, double terminateDistance)	Constructs a DistanceOp that computes the distance and nearest points between the two specified geometries.
GeometryLocation(Geometry component, int segIndex, Coordinate pt)	Constructs a GeometryLocation specifying a point on a geometry, as well as the segment that the point is on (or GeometryLocation.INSIDE_AREA if the point is not on a segment).
GeometryLocation(Geometry component, Coordinate pt)	Constructs a GeometryLocation specifying a point inside an area geometry.
IndexedFacetDistance(Geometry g1)	Creates a new distance-finding instance for a given target Geometry.

Uses of Geometry in org.meteoinfo.jts.operation.distance3d

Methods in org.meteoinfo.jts.operation.distance3d with parameters of type Geometry

Modifier and Type	Method	Description
static double	Distance3DOp.distance(Geometry g0, Geometry g1)	Compute the distance between the nearest points of two geometries.
static boolean	Distance3DOp.isWithinDistance(Geometry g0, Geometry g1, double distance)	Test whether two geometries lie within a given distance of each other.
static Coordinate[]	Distance3DOp.nearestPoints(Geometry g0, Geometry g1)	Compute the the nearest points of two geometries.

Constructors in org.meteoinfo.jts.operation.distance3d with parameters of type Geometry

Constructor	Description
Distance3DOp(Geometry g0, Geometry g1)	Constructs a DistanceOp that computes the distance and nearest points between the two specified geometries.
Distance3DOp(Geometry g0, Geometry g1, double terminateDistance)	Constructs a DistanceOp that computes the distance and nearest points between the two specified geometries.

Uses of Geometry in org.meteoinfo.jts.operation.linemerge

Methods in org.meteoinfo.jts.operation.linemerge that return Geometry

Modifier and Type	Method	Description
Geometry	LineSequencer.getSequencedLineStrings()	Returns the LineString or MultiLineString built by the sequencing process, if one exists.
static Geometry	LineSequencer.sequence(Geometry geom)

Methods in org.meteoinfo.jts.operation.linemerge with parameters of type Geometry

Modifier and Type	Method	Description
void	LineMerger.add(Geometry geometry)	Adds a Geometry to be processed.
void	LineSequencer.add(Geometry geometry)	Adds a Geometry to be sequenced.
static boolean	LineSequencer.isSequenced(Geometry geom)	Tests whether a Geometry is sequenced correctly.
static Geometry	LineSequencer.sequence(Geometry geom)

Uses of Geometry in org.meteoinfo.jts.operation.overlay

Methods in org.meteoinfo.jts.operation.overlay that return Geometry

Modifier and Type	Method	Description
static Geometry	OverlayOp.createEmptyResult(int overlayOpCode, Geometry a, Geometry b, GeometryFactory geomFact)	Creates an empty result geometry of the appropriate dimension, based on the given overlay operation and the dimensions of the inputs.
Geometry	OverlayOp.getResultGeometry(int overlayOpCode)	Gets the result of the overlay for a given overlay operation.
static Geometry	OverlayOp.overlayOp(Geometry geom0, Geometry geom1, int opCode)	Computes an overlay operation for the given geometry arguments.

Methods in org.meteoinfo.jts.operation.overlay with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	OverlayOp.createEmptyResult(int overlayOpCode, Geometry a, Geometry b, GeometryFactory geomFact)	Creates an empty result geometry of the appropriate dimension, based on the given overlay operation and the dimensions of the inputs.
static Geometry	OverlayOp.overlayOp(Geometry geom0, Geometry geom1, int opCode)	Computes an overlay operation for the given geometry arguments.

Constructors in org.meteoinfo.jts.operation.overlay with parameters of type Geometry

Constructor	Description
OverlayOp(Geometry g0, Geometry g1)	Constructs an instance to compute a single overlay operation for the given geometries.

Uses of Geometry in org.meteoinfo.jts.operation.overlay.snap

Methods in org.meteoinfo.jts.operation.overlay.snap that return Geometry

Modifier and Type	Method	Description
static Geometry	SnapIfNeededOverlayOp.difference(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.difference(Geometry g0, Geometry g1)
Geometry	SnapIfNeededOverlayOp.getResultGeometry(int opCode)
Geometry	SnapOverlayOp.getResultGeometry(int opCode)
static Geometry	SnapIfNeededOverlayOp.intersection(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.intersection(Geometry g0, Geometry g1)
static Geometry	SnapIfNeededOverlayOp.overlayOp(Geometry g0, Geometry g1, int opCode)
static Geometry	SnapOverlayOp.overlayOp(Geometry g0, Geometry g1, int opCode)
static Geometry[]	GeometrySnapper.snap(Geometry g0, Geometry g1, double snapTolerance)	Snaps two geometries together with a given tolerance.
Geometry	GeometrySnapper.snapTo(Geometry snapGeom, double snapTolerance)	Snaps the vertices in the component LineStrings of the source geometry to the vertices of the given snap geometry.
Geometry	GeometrySnapper.snapToSelf(double snapTolerance, boolean cleanResult)	Snaps the vertices in the component LineStrings of the source geometry to the vertices of the same geometry.
static Geometry	GeometrySnapper.snapToSelf(Geometry geom, double snapTolerance, boolean cleanResult)	Snaps a geometry to itself.
static Geometry	SnapIfNeededOverlayOp.symDifference(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.symDifference(Geometry g0, Geometry g1)
static Geometry	SnapIfNeededOverlayOp.union(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.union(Geometry g0, Geometry g1)

Methods in org.meteoinfo.jts.operation.overlay.snap with parameters of type Geometry

Modifier and Type	Method	Description
static double	GeometrySnapper.computeOverlaySnapTolerance(Geometry g)	Estimates the snap tolerance for a Geometry, taking into account its precision model.
static double	GeometrySnapper.computeOverlaySnapTolerance(Geometry g0, Geometry g1)
static double	GeometrySnapper.computeSizeBasedSnapTolerance(Geometry g)
static Geometry	SnapIfNeededOverlayOp.difference(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.difference(Geometry g0, Geometry g1)
static Geometry	SnapIfNeededOverlayOp.intersection(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.intersection(Geometry g0, Geometry g1)
static Geometry	SnapIfNeededOverlayOp.overlayOp(Geometry g0, Geometry g1, int opCode)
static Geometry	SnapOverlayOp.overlayOp(Geometry g0, Geometry g1, int opCode)
static Geometry[]	GeometrySnapper.snap(Geometry g0, Geometry g1, double snapTolerance)	Snaps two geometries together with a given tolerance.
Geometry	GeometrySnapper.snapTo(Geometry snapGeom, double snapTolerance)	Snaps the vertices in the component LineStrings of the source geometry to the vertices of the given snap geometry.
static Geometry	GeometrySnapper.snapToSelf(Geometry geom, double snapTolerance, boolean cleanResult)	Snaps a geometry to itself.
static Geometry	SnapIfNeededOverlayOp.symDifference(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.symDifference(Geometry g0, Geometry g1)
static Geometry	SnapIfNeededOverlayOp.union(Geometry g0, Geometry g1)
static Geometry	SnapOverlayOp.union(Geometry g0, Geometry g1)

Constructors in org.meteoinfo.jts.operation.overlay.snap with parameters of type Geometry

Constructor	Description
GeometrySnapper(Geometry srcGeom)	Creates a new snapper acting on the given geometry
SnapIfNeededOverlayOp(Geometry g1, Geometry g2)
SnapOverlayOp(Geometry g1, Geometry g2)

Uses of Geometry in org.meteoinfo.jts.operation.overlay.validate

Methods in org.meteoinfo.jts.operation.overlay.validate with parameters of type Geometry

Modifier and Type	Method	Description
static boolean	OverlayResultValidator.isValid(Geometry a, Geometry b, int overlayOp, Geometry result)

Constructors in org.meteoinfo.jts.operation.overlay.validate with parameters of type Geometry

Constructor	Description
FuzzyPointLocator(Geometry g, double boundaryDistanceTolerance)
OffsetPointGenerator(Geometry g)
OverlayResultValidator(Geometry a, Geometry b, Geometry result)

Uses of Geometry in org.meteoinfo.jts.operation.polygonize

Methods in org.meteoinfo.jts.operation.polygonize that return Geometry

Modifier and Type	Method	Description
Geometry	Polygonizer.getGeometry()	Gets a geometry representing the polygons formed by the polygonization.

Methods in org.meteoinfo.jts.operation.polygonize with parameters of type Geometry

Modifier and Type	Method	Description
void	Polygonizer.add(Geometry g)	Add a Geometry to the edges to be polygonized.

Uses of Geometry in org.meteoinfo.jts.operation.predicate

Methods in org.meteoinfo.jts.operation.predicate with parameters of type Geometry

Modifier and Type	Method	Description
boolean	RectangleContains.contains(Geometry geom)
static boolean	RectangleContains.contains(Polygon rectangle, Geometry b)	Tests whether a rectangle contains a given geometry.
boolean	RectangleIntersects.intersects(Geometry geom)	Tests whether the given Geometry intersects the query rectangle.
static boolean	RectangleIntersects.intersects(Polygon rectangle, Geometry b)	Tests whether a rectangle intersects a given geometry.

Uses of Geometry in org.meteoinfo.jts.operation.relate

Methods in org.meteoinfo.jts.operation.relate with parameters of type Geometry

Modifier and Type	Method	Description
static IntersectionMatrix	RelateOp.relate(Geometry a, Geometry b)	Computes the IntersectionMatrix for the spatial relationship between two Geometrys, using the default (OGC SFS) Boundary Node Rule
static IntersectionMatrix	RelateOp.relate(Geometry a, Geometry b, BoundaryNodeRule boundaryNodeRule)	Computes the IntersectionMatrix for the spatial relationship between two Geometrys using a specified Boundary Node Rule.

Constructors in org.meteoinfo.jts.operation.relate with parameters of type Geometry

Constructor	Description
RelateOp(Geometry g0, Geometry g1)	Creates a new Relate operation, using the default (OGC SFS) Boundary Node Rule.
RelateOp(Geometry g0, Geometry g1, BoundaryNodeRule boundaryNodeRule)	Creates a new Relate operation with a specified Boundary Node Rule.

Uses of Geometry in org.meteoinfo.jts.operation.union

Methods in org.meteoinfo.jts.operation.union that return Geometry

Modifier and Type	Method	Description
Geometry	CascadedPolygonUnion.union()	Computes the union of the input geometries.
static Geometry	CascadedPolygonUnion.union(java.util.Collection polys)	Computes the union of a collection of Polygonal Geometrys.
Geometry	PointGeometryUnion.union()
static Geometry	PointGeometryUnion.union(Puntal pointGeom, Geometry otherGeom)
Geometry	UnaryUnionOp.union()	Gets the union of the input geometries.
static Geometry	UnaryUnionOp.union(java.util.Collection geoms)	Computes the geometric union of a Collection of Geometrys.
static Geometry	UnaryUnionOp.union(java.util.Collection geoms, GeometryFactory geomFact)	Computes the geometric union of a Collection of Geometrys.
static Geometry	UnaryUnionOp.union(Geometry geom)	Constructs a unary union operation for a Geometry (which may be a GeometryCollection).
Geometry	UnionInteracting.union()
static Geometry	UnionInteracting.union(Geometry g0, Geometry g1)

Methods in org.meteoinfo.jts.operation.union with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	PointGeometryUnion.union(Puntal pointGeom, Geometry otherGeom)
static Geometry	UnaryUnionOp.union(Geometry geom)	Constructs a unary union operation for a Geometry (which may be a GeometryCollection).
static Geometry	UnionInteracting.union(Geometry g0, Geometry g1)

Constructors in org.meteoinfo.jts.operation.union with parameters of type Geometry

Constructor	Description
PointGeometryUnion(Puntal pointGeom, Geometry otherGeom)
UnaryUnionOp(Geometry geom)	Constructs a unary union operation for a Geometry (which may be a GeometryCollection).
UnionInteracting(Geometry g0, Geometry g1)

Uses of Geometry in org.meteoinfo.jts.operation.valid

Methods in org.meteoinfo.jts.operation.valid with parameters of type Geometry

Modifier and Type	Method	Description
boolean	RepeatedPointTester.hasRepeatedPoint(Geometry g)
static boolean	IsValidOp.isValid(Geometry geom)	Tests whether a Geometry is valid.

Constructors in org.meteoinfo.jts.operation.valid with parameters of type Geometry

Constructor	Description
IsValidOp(Geometry parentGeometry)

Uses of Geometry in org.meteoinfo.jts.precision

Methods in org.meteoinfo.jts.precision that return Geometry

Modifier and Type	Method	Description
Geometry	CommonBitsOp.buffer(Geometry geom0, double distance)	Computes the buffer a geometry, using enhanced precision.
static Geometry	EnhancedPrecisionOp.buffer(Geometry geom, double distance)	Computes the buffer of a Geometry, using enhanced precision.
Geometry	CommonBitsOp.difference(Geometry geom0, Geometry geom1)	Computes the set-theoretic difference of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.difference(Geometry geom0, Geometry geom1)	Computes the set-theoretic difference of two Geometrys, using enhanced precision.
static Geometry	MinimumClearance.getLine(Geometry g)	Gets a LineString containing two points which are at the Minimum Clearance distance for the given Geometry.
static Geometry	SimpleMinimumClearance.getLine(Geometry g)
Geometry	CommonBitsOp.intersection(Geometry geom0, Geometry geom1)	Computes the set-theoretic intersection of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.intersection(Geometry geom0, Geometry geom1)	Computes the set-theoretic intersection of two Geometrys, using enhanced precision.
Geometry	GeometryPrecisionReducer.reduce(Geometry geom)
static Geometry	GeometryPrecisionReducer.reduce(Geometry g, PrecisionModel precModel)	Convenience method for doing precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same, and preserving polygonal topology.
Geometry	SimpleGeometryPrecisionReducer.reduce(Geometry geom)	Deprecated.
static Geometry	SimpleGeometryPrecisionReducer.reduce(Geometry g, PrecisionModel precModel)	Deprecated. Convenience method for doing precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same.
static Geometry	GeometryPrecisionReducer.reducePointwise(Geometry g, PrecisionModel precModel)	Convenience method for doing pointwise precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same, but NOT preserving valid polygonal topology.
Geometry	CommonBitsRemover.removeCommonBits(Geometry geom)	Removes the common coordinate bits from a Geometry.
Geometry	CommonBitsOp.symDifference(Geometry geom0, Geometry geom1)	Computes the set-theoretic symmetric difference of two geometries, using enhanced precision.
static Geometry	EnhancedPrecisionOp.symDifference(Geometry geom0, Geometry geom1)	Computes the set-theoretic symmetric difference of two Geometrys, using enhanced precision.
Geometry	CommonBitsOp.union(Geometry geom0, Geometry geom1)	Computes the set-theoretic union of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.union(Geometry geom0, Geometry geom1)	Computes the set-theoretic union of two Geometrys, using enhanced precision.

Methods in org.meteoinfo.jts.precision with parameters of type Geometry

Modifier and Type	Method	Description
void	CommonBitsRemover.add(Geometry geom)	Add a geometry to the set of geometries whose common bits are being computed.
void	CommonBitsRemover.addCommonBits(Geometry geom)	Adds the common coordinate bits back into a Geometry.
Geometry	CommonBitsOp.buffer(Geometry geom0, double distance)	Computes the buffer a geometry, using enhanced precision.
static Geometry	EnhancedPrecisionOp.buffer(Geometry geom, double distance)	Computes the buffer of a Geometry, using enhanced precision.
Geometry	CommonBitsOp.difference(Geometry geom0, Geometry geom1)	Computes the set-theoretic difference of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.difference(Geometry geom0, Geometry geom1)	Computes the set-theoretic difference of two Geometrys, using enhanced precision.
Coordinate[]	PrecisionReducerCoordinateOperation.edit(Coordinate[] coordinates, Geometry geom)
static double	MinimumClearance.getDistance(Geometry g)	Computes the Minimum Clearance distance for the given Geometry.
static double	SimpleMinimumClearance.getDistance(Geometry g)
static Geometry	MinimumClearance.getLine(Geometry g)	Gets a LineString containing two points which are at the Minimum Clearance distance for the given Geometry.
static Geometry	SimpleMinimumClearance.getLine(Geometry g)
Geometry	CommonBitsOp.intersection(Geometry geom0, Geometry geom1)	Computes the set-theoretic intersection of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.intersection(Geometry geom0, Geometry geom1)	Computes the set-theoretic intersection of two Geometrys, using enhanced precision.
Geometry	GeometryPrecisionReducer.reduce(Geometry geom)
static Geometry	GeometryPrecisionReducer.reduce(Geometry g, PrecisionModel precModel)	Convenience method for doing precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same, and preserving polygonal topology.
Geometry	SimpleGeometryPrecisionReducer.reduce(Geometry geom)	Deprecated.
static Geometry	SimpleGeometryPrecisionReducer.reduce(Geometry g, PrecisionModel precModel)	Deprecated. Convenience method for doing precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same.
static Geometry	GeometryPrecisionReducer.reducePointwise(Geometry g, PrecisionModel precModel)	Convenience method for doing pointwise precision reduction on a single geometry, with collapses removed and keeping the geometry precision model the same, but NOT preserving valid polygonal topology.
Geometry	CommonBitsRemover.removeCommonBits(Geometry geom)	Removes the common coordinate bits from a Geometry.
Geometry	CommonBitsOp.symDifference(Geometry geom0, Geometry geom1)	Computes the set-theoretic symmetric difference of two geometries, using enhanced precision.
static Geometry	EnhancedPrecisionOp.symDifference(Geometry geom0, Geometry geom1)	Computes the set-theoretic symmetric difference of two Geometrys, using enhanced precision.
Geometry	CommonBitsOp.union(Geometry geom0, Geometry geom1)	Computes the set-theoretic union of two Geometrys, using enhanced precision.
static Geometry	EnhancedPrecisionOp.union(Geometry geom0, Geometry geom1)	Computes the set-theoretic union of two Geometrys, using enhanced precision.

Constructors in org.meteoinfo.jts.precision with parameters of type Geometry

Constructor	Description
MinimumClearance(Geometry geom)	Creates an object to compute the Minimum Clearance for the given Geometry
SimpleMinimumClearance(Geometry geom)

Uses of Geometry in org.meteoinfo.jts.shape

Methods in org.meteoinfo.jts.shape that return Geometry

Modifier and Type	Method	Description
abstract Geometry	GeometricShapeBuilder.getGeometry()

Uses of Geometry in org.meteoinfo.jts.shape.fractal

Methods in org.meteoinfo.jts.shape.fractal that return Geometry

Modifier and Type	Method	Description
Geometry	KochSnowflakeBuilder.getGeometry()
Geometry	SierpinskiCarpetBuilder.getGeometry()

Uses of Geometry in org.meteoinfo.jts.shape.random

Fields in org.meteoinfo.jts.shape.random declared as Geometry

Modifier and Type	Field	Description
protected Geometry	RandomPointsBuilder.maskPoly

Methods in org.meteoinfo.jts.shape.random that return Geometry

Modifier and Type	Method	Description
Geometry	RandomPointsBuilder.getGeometry()
Geometry	RandomPointsInGridBuilder.getGeometry()	Gets the MultiPoint containing the generated point

Methods in org.meteoinfo.jts.shape.random with parameters of type Geometry

Modifier and Type	Method	Description
void	RandomPointsBuilder.setExtent(Geometry mask)	Sets a polygonal mask.

Uses of Geometry in org.meteoinfo.jts.simplify

Methods in org.meteoinfo.jts.simplify that return Geometry

Modifier and Type	Method	Description
Geometry	DouglasPeuckerSimplifier.getResultGeometry()	Gets the simplified geometry.
Geometry	TopologyPreservingSimplifier.getResultGeometry()
Geometry	VWSimplifier.getResultGeometry()	Gets the simplified geometry.
static Geometry	DouglasPeuckerSimplifier.simplify(Geometry geom, double distanceTolerance)	Simplifies a geometry using a given tolerance.
static Geometry	TopologyPreservingSimplifier.simplify(Geometry geom, double distanceTolerance)
static Geometry	VWSimplifier.simplify(Geometry geom, double distanceTolerance)	Simplifies a geometry using a given tolerance.

Methods in org.meteoinfo.jts.simplify with parameters of type Geometry

Modifier and Type	Method	Description
static Geometry	DouglasPeuckerSimplifier.simplify(Geometry geom, double distanceTolerance)	Simplifies a geometry using a given tolerance.
static Geometry	TopologyPreservingSimplifier.simplify(Geometry geom, double distanceTolerance)
static Geometry	VWSimplifier.simplify(Geometry geom, double distanceTolerance)	Simplifies a geometry using a given tolerance.

Constructors in org.meteoinfo.jts.simplify with parameters of type Geometry

Constructor	Description
DouglasPeuckerSimplifier(Geometry inputGeom)	Creates a simplifier for a given geometry.
TopologyPreservingSimplifier(Geometry inputGeom)
VWSimplifier(Geometry inputGeom)	Creates a simplifier for a given geometry.

Uses of Geometry in org.meteoinfo.jts.triangulate

Methods in org.meteoinfo.jts.triangulate that return Geometry

Modifier and Type	Method	Description
Geometry	ConformingDelaunayTriangulator.getConvexHull()	Gets the convex hull of all the sites in the triangulation, including constraint vertices.
Geometry	VoronoiDiagramBuilder.getDiagram(GeometryFactory geomFact)	Gets the faces of the computed diagram as a GeometryCollection of Polygons, clipped as specified.
Geometry	ConformingDelaunayTriangulationBuilder.getEdges(GeometryFactory geomFact)	Gets the edges of the computed triangulation as a MultiLineString.
Geometry	DelaunayTriangulationBuilder.getEdges(GeometryFactory geomFact)	Gets the edges of the computed triangulation as a MultiLineString.
Geometry	ConformingDelaunayTriangulationBuilder.getTriangles(GeometryFactory geomFact)	Gets the faces of the computed triangulation as a GeometryCollection of Polygon.
Geometry	DelaunayTriangulationBuilder.getTriangles(GeometryFactory geomFact)	Gets the faces of the computed triangulation as a GeometryCollection of Polygon.

Methods in org.meteoinfo.jts.triangulate with parameters of type Geometry

Modifier and Type	Method	Description
static CoordinateList	DelaunayTriangulationBuilder.extractUniqueCoordinates(Geometry geom)	Extracts the unique Coordinates from the given Geometry.
void	VertexTaggedGeometryDataMapper.loadSourceGeometries(Geometry geomColl)
void	ConformingDelaunayTriangulationBuilder.setConstraints(Geometry constraintLines)	Sets the linear constraints to be conformed to.
void	ConformingDelaunayTriangulationBuilder.setSites(Geometry geom)	Sets the sites (point or vertices) which will be triangulated.
void	DelaunayTriangulationBuilder.setSites(Geometry geom)	Sets the sites (vertices) which will be triangulated.
void	VoronoiDiagramBuilder.setSites(Geometry geom)	Sets the sites (point or vertices) which will be diagrammed.
void	VertexTaggedGeometryDataMapper.transferData(Geometry targetGeom)	Input is assumed to be a multiGeometry in which every component has its userData set to be a Coordinate which is the key to the output data.

Uses of Geometry in org.meteoinfo.jts.triangulate.quadedge

Methods in org.meteoinfo.jts.triangulate.quadedge that return Geometry

Modifier and Type	Method	Description
Geometry	QuadEdgeSubdivision.getEdges(GeometryFactory geomFact)	Gets the geometry for the edges in the subdivision as a MultiLineString containing 2-point lines.
Geometry	QuadEdgeSubdivision.getTriangles(GeometryFactory geomFact)	Gets the geometry for the triangles in a triangulated subdivision as a GeometryCollection of triangular Polygons.
Geometry	QuadEdgeSubdivision.getVoronoiDiagram(GeometryFactory geomFact)	Gets the cells in the Voronoi diagram for this triangulation.
static Geometry	QuadEdgeTriangle.toPolygon(QuadEdge[] e)
static Geometry	QuadEdgeTriangle.toPolygon(Vertex[] v)

Uses of Geometry in org.meteoinfo.jts.util

Methods in org.meteoinfo.jts.util that return Geometry

Modifier and Type	Method	Description
protected Geometry	GeometricShapeFactory.rotate(Geometry geom)

Methods in org.meteoinfo.jts.util with parameters of type Geometry

Modifier and Type	Method	Description
static boolean	Debug.hasSegment(Geometry geom, Coordinate p0, Coordinate p1)
protected Geometry	GeometricShapeFactory.rotate(Geometry geom)

Uses of Geometry in org.meteoinfo.shape

Methods in org.meteoinfo.shape that return Geometry

Modifier and Type	Method	Description
Geometry	PointShape.toGeometry(GeometryFactory factory)	To geometry method
Geometry	Polygon.toGeometry(GeometryFactory factory)	To geometry
Geometry	PolygonShape.toGeometry(GeometryFactory factory)	To geometry method
Geometry	PolylineShape.toGeometry(GeometryFactory factory)	To geometry method
Geometry	Shape.toGeometry()	To geometry method
abstract Geometry	Shape.toGeometry(GeometryFactory factory)	To geometry method

Methods in org.meteoinfo.shape with parameters of type Geometry

Modifier and Type	Method	Description
static Shape	ShapeFactory.createShape(Geometry a)	Create shape from geometry
static Shape	Shape.geometry2Shape(Geometry geo)

Constructors in org.meteoinfo.shape with parameters of type Geometry

Constructor	Description
PointShape(Geometry geometry)	Constructor
PointZShape(Geometry geometry)	Constructor
PolygonMShape(Geometry geometry)	Constructor
PolygonShape(Geometry geometry)	Constructor
PolylineShape(Geometry geometry)	Constructor
PolylineZShape(Geometry geometry)	Constructor
Shape(Geometry geometry)	Constructor